Installation Guide

3/08
92-2351
Rev-2
SPEAKMAN
®
PO Box 191 Wilmington, DE 19899 Phone: [phone] Fax: [phone]
Visit us on the web at www.speakmancompany.com
MAINTENANCE
Should you need parts to repair this unit, please reference
the parts listing below for correct part numbers. Before
any maintenance is done be sure to shut the water
supply off.
WARNING: Use only genuine Speakman parts when
repairing or replacing components. To order parts call
1-800-537-2107.
SE-911-SS REPLACEMENT/REPAIR PARTS
ITEM PART/GROUP # DESCRIPTION
SE-911-SS:
1 20-0931-SS 1” Ball Valve
2 G04-0724 Long Lever w/Plunger
(Vertical Installation)
2A G04-0722 Short Lever w/Plunger
(Horizontal Installation)
3 01-0684-MO S/S Locknut
4 48-0199-MO 1/4”-20 x 5/8” Machined
Screw
5 01-0796-SS S/S Jam Nut
SE-911-CR-SS:
6 05-1332-SS #3 S/S Chain 32” Long
05-1333-SS #3 S/S Chain 9” Long
7 35-0029 S-Hook (4 Typ.)
8 22-0039-SS 8” S/S Ring
22-0040-SS 3” S/S Ring
SE-911-PR-SS:
9 G04-0722 Short Lever
10 G47-0046-29 Aluminum Pull Rod
FLOW DATA
VALVE:
NOTE: This unit should be connected to an uninterrupted source of potable water, with a minimum flowing
pressure of 20 PSI and a maximum static pressure of 125 PSI.
SE-911-PR
SE-911-CR
FLOW PRESSURE PSI (BAR) 5 (.34) 10 (.69) 15 (1.03) 20 (1.38) 25 (1.72)
FLOW RATE GPM (LPM) 44 (167) 68 (257) 80 (303) 92 (348) 103 (390)
Note: All units meet existing
ANSI Z358.1 Standards and
OSHA Rules. Product
improvements may cause
specification and
dimensional changes
without notice.