Installation Sheet

Flow Data:
To Clean the In-Line Strainer:
To Clean the Non-Aerated Outlets:
To Clean the Aerated Outlets:
REPAIR PART GROUPS
ROUGH IN DIMENSIONS
Using the Aerator Wrench , remove the Aerator .
The Flow Control Housing will come out next, with the
Flow Control inside of it. Remove the Flow Control
and check for debris surrounding the o-ring. Flush with
clean water. Check the mesh on the back of the Aerator
for debris. Flush with clean water.
Begin by removing the Hose Clamp , then remove
Hose from Housing . Flow Control can be seen
inside Housing at this point. Remove Flow Control
and check for debris surrounding the o-ring. Flush with
clean water.
PRESSURE
FLOW RATE
psi
bar
30
2.07
60
4.14
gpm
L/min
4.9
18.5
5.0
18.9
1
2
3
4
1
2
3
4
1
2 3
4
4
4
1
3
2
Begin by removing Supply Hose from Hose
Manifold Tee . The Strainer will be located inside
the threading of Supply Hose . Remove Strainer
and check for debris. Flush with clean water.
3
1
2
3
2
1
2
3
Part No.
RPG49-0010
RPG07-0023
RPG63-0087
RPG05-2500
RPG05-0936
SE-910
SE-910-SSBV
1/2” Ball Valve with Paddle Handle
1/2” Stainless Steel Ball Valve with Paddle Handle
Description
Spray Outlet Gaskets
Dust Cover Group
Stainless Steel Flex Hose
Aerators (6)
Complete Spray System Replacement Group
17
32
"
13mm
(Typ. 3 Places Equally
Spaced 120° Apart)
7
7
8
"
200mm
FLOOR FLANGE
DETAIL
6"±
1
4
"
152mm±3
35in±
3
16
"
890mm±5
12
1
32
"±
1
16
"
305mm±2
12
15
16
"±
1
4
"
328mm±6
1
15
16
"±
1
16
"
49mm±2
5
3
16
"±
3
16
"
131mm±5
6
11
16
"±
1
8
"
170mm±3
41
7
16
"±
1
2
"
1052mm±13
1/2" NPT
Female Inlet
14
15
16
"±
3
16
"
379mm±5
4
1
2
"±.19
116mm±5
9
13
16
"±
3
16
"
249mm±5
Part No.
SE-1000
SE-1050
SE-1055
Description
Plastic Bowl, Chrome Plated Brass Ball Valve
S/S Bowl, Chrome Plated Brass Ball Valve
S/S Bowl, Stainless Steel Ball Valve (SE-1155 Only)