Installation Guide

6
Install the Gooseneck Spout to the Faucet Body.
If you wish to have a non-swivel spout, place the
supplied lock washer (1) between the Gooseneck
Spout and the Faucet Body. Wrench tighten
Gooseneck Spout Collar to Faucet Base.
Install for rigid
(non-swivel) feature
7
Install the Trim Sleeves (1) over the spindles,
followed by the Handles (2), Lock Washers (3),
and secure with Handle Screws (4). Install Index
Buttons (5) into handles (Blue on right handle, Red
on left handle).
8
Turn on water supplies and flush both COLD and
HOT cartridges for one minute, while checking
for leaks.
9
Turn off COLD and HOT handles and install
supplied Spray Outlet with supplied Wrench.
SC-5724 REPAIR PARTS
ITEM NO. PART NO. DESCRIPTION
RPG05-0532-CA PERFECT VALVE GROUP (RED/HOT) WITH TRIM SLEEVE AND SCREW
RPG05-0533-CA PERFECT VALVE GROUP (BLUE/COLD) WITH TRIM SLEEVE AND SCREW
RPG04-0316-PC 4" WRIST BLADE HANDLE GROUP
RPG41-0285 RED, BLUE, AND WHITE INDEX BUTTONS WITH SCREWS AND LOCK WASHERS
G18-0217-CA 8" GOOSENECK SPOUT ASSEMBLY
RPG05-0837-PC 1.5 GPM AERATOR ASSEMBLY WITH WRENCH
RPG05-0851-PC 1.5 GPM LAMINAR FLOW OUTLET ASSEMBLY WITH WRENCH
A-EA12 1.2 GPM AERATOR ASSEMBLY WITH WRENCH
RPG38-0128-PC BOCA 0.5 GPM FLOW OUTLET ASSEMBLY WITH WRENCH (-E)
A-ELF 1.2 GPM LAMINAR FLOW OUTLET ASSEMBLY WITH WRENCH