Installation Guide

MAINTENANCE
1) Your SENSORFLO
®
Faucet is designed and engineered in accordance with the highest
quality and performance standards. With proper care, it will provide years of hygienic and
trouble-free service.
2) Periodically, the Faucet will require some minor maintenance to keep it at peak performance. There are
2 low battery indicator lights. One located on the Sensor on the Faucet body and the other located on
the Solenoid Box. When the low battery light on the Sensor blinks, it indicates that the battery is low.
However, the Solenoid can still function at this point. When the low battery light on the Solenoid blinks,
the Solenoid will stop functioning at this point and the batteries need to be replaced immediately. To
replace the batteries, follow the installation instructions in the electrical connections section of this
document.
3) Periodically clean the In-Line Filter.
4) The finish of your Faucet should be cleaned using mild soap and warm water.
5) Dry immediately with a soft, clean cloth for best results.
6) NEVER use abrasive cleaners, chemicals, alcohol or other solvents. They may damage the surfaces of
the non-chrome plated finishes.
PRODUCT WARRANTY
With exception of items listed below, this product has a limited warranty against defects in
materials or workmanship for the period listed below from the date of purchase.
Consumer/Residential: Limited Lifetime Warranty
Commercial Use: 5 Year Limited Warranty
Warranty is limited to replacement of defective components or units.
Associated replacement or repair labor costs are NOT included. This warranty only pertains to single
dwelling residential use. Products used for other than single dwelling residential use are covered by a 5
year limited warranty from the date of purchase.
CALIFORNIA PROPOSITION 65
CALIFORNIA PROPOSITION 65:
WARNING: This product can expose you to chemicals including lead, which is known to
the State of California to cause cancer and birth defects or other reproductive harm. For
more information go to www.P65Warnings.ca.gov.
Wash hands after installation, repair, or removal of this product.
RPG76-115361
REPLACEMENT SOLENOID
RPG76-107259
A/C CONVERSION KIT
(120VAC TO 6VDC)
RPG05-112704-PC
SPRAY HEAD ASSEMBLY
(POLISHED CHROME)
RPG05-112704-SS
SPRAY HEAD ASSEMBLY
(STAINLESS STEEL)
RPG05-112704-MB
SPRAY HEAD ASSEMBLY
(MATTE BLACK)
RPG05-112703
CARTRIDGE
REPAIR PARTS
COMPLIANCE
CONNECTIONS
ASME A112.18.1
CSA B125.1
NSF/ANSI 61/372
CEC
3/8” Compression Inlets
(9/16”-24 UNF)
ROUGH-IN DIAGRAM
DIMENSIONS SUBJECT TO CHANGE WITHOUT NOTICE.
3
1
8
"
80mm
MAX DECK THICKNESS
2
3
16
"
55mm
1-1/4" MIN DECK HOLE SIZE
15
5
16
"
389mm
1
7
16
"
36mm
SOLENOID INLET
3/8" COMPRESSION
SPRAYHEAD INLET
CONNECT TO SOLENOID OUTLET
QUICK CONNECT FITTING
47" (1200mm) LONG
HOT/COLD INLET
3/8" COMPRESSION
24"(610mm) LONG
MIXED WATER OUTLET
CONNECT TO SOLENOID INLET
3/8" COMPRESSION
24"(610mm) LONG
*NOT TO SCALE
SOLENOID OUTLET
QUICK CONNECT FITTING
10
5
8
"
270mm
8
9
16
"
217mm
8
5
8
"
218mm
6°
2"
51mm
MIN TO WALL
2"
51mm
MIN TO SINK LEDGE
FLOW
1.8 gpm (6.8 L/min)