Installation Guide

6
NOTICE: To avoid damage to the O-rings on the bottom of the faucet,
keep the faucet vertical and use care when installing the faucet.
6mm
• Make sure the water is turned OFF.
• Relieve the water pressure.
• Remove the Plugs from the Base.
• Place the Faucet onto the Base and insert the
Screws provided through the Flange.
• Tighten the Screws using the Hex Wrench provided.
• Slide the Escutcheon down onto the finished floor,
covering the Base.
ESCUTCHEON
SCREW
FLANGE
BASE
PLUG
FAUCET INSTALLATION
7
2.5mm
• Install the Spout as shown.
SPOUT
CAP
SET SCREW
SPOUT INSTALLATION
8
• Install the Hand Shower flexible hose as shown. Hand tighten connections.
HAND SHOWER HOSE INSTALLATION
DIVERTER BUTTON
HOSE
HAND SHOWER
HOLDER
9
HANDLE
HAND SHOWER
HOLDER
DIVERTER
BUTTON
HOSE
HAND SHOWER
• Ensure the Faucet Handle is in the OFF position.
• Turn on the water supplies and check for leaks.
• Point the Hose into the bath and turn the Faucet
Handle to the ON position.
• Push the Diverter Button of the faucet to send water
through the hose to remove debris.
• Turn the Faucet OFF to reset the diverter.
• Turn the Faucet ON and run hot and cold water
through the Spout to remove debris.
• Check for leaks.
• Turn the Faucet OFF.
• Install the Hand Shower to the Hose, hand tighten,
and place into the Hand Shower Holder.
CONFIRM PROPER INSTALLATION
SB-2534 / SB-2536 REPAIR PARTS
SPEAKMAN
®
RPG05-105440 HANDHELD REPAIR GROUP
RPG63-112940 HOSE REPAIR GROUP
RPG05-112951 CARTRIDGE REPAIR GROUP
RPG05-112932 WATER DIVERTER REPAIR GROUP
ITEM NO. PART NO. DESCRIPTION