Installation

SPEAKMAN
®
400 Anchor Mill Rd. New Castle, DE 19720 Phone: [phone] Fax: [phone]
07/17/18 www.speakman.com 92-ALM3-C1D2-01
OPERATION
Alarm sounds and lights flashes automatically when emergency equipment is activated. This continues until
the emergency equipment is deactivated. This model alarm is supplied with a "Silencing" Push Button located
on the front of the alarm enclosure that can be pushed to shut the Horn off during normal operation of the
alarm, and will automatically reset once alarm is deactivated when emergency shower or eyewash is shut off.
TESTING PROGRAM
The American National Standards Institute (ANSI) states that all safety emergency equipment shall be
activated on a weekly basis to flush the line and verify proper operation. Speakman Company furnishes a
testing record tag (91-0635) with each unit. On this tag the date of inspection and the inspector’s initials
should be noted.
MAINTENANCE
To avoid electric shock, make sure power supply is shut off before doing any electrical maintenance to this
unit.
ROUGH-IN
REPLACEMENT/REPAIR PARTS
ITEM PART/GROUP # DESCRIPTION
1 RPG76-110060 Visual Flashing LED Light
WARNING: Use only genuine Speakman parts when repairing or replacing components .
To order parts call 1-800-537-2107.
Note: All units meet existing ANSI Z358.1 Standards and OSHA Rules. Product improvements may cause specification and dimensional
changes without notice.