Installation Guide

3
IF MOUNTING THRU TILE WALL:
Drill thru tile only using a 3/16” (#12) drill bit
that is designed for tile.
4
IF MOUNTING THRU TILE WALL:
Apply Silicone Sealant into the eight (X8)
drilled holes.
5
Secure each Wall Plate to wall using four
(X4) of the Mounting Screws provided.
OR
6
Slide Trim Flanges towards you to release the
locating pin. Rotate into mounting position with
the Set Screw facing downward. Position the
Trim Flange over the Mounting Plate and tighten
Set Screw with the included Hex Key Wrench.
Apply Silicone where Trim Plate meets the wall if
desired.
SA-2509 ROUGH-IN DIAGRAM
SPEAKMAN
®
DIMENSIONS SUBJECT TO CHANGE WITHOUT NOTICE.
DIMENSION “B”
SA-2509-24 24” (610mm)
SA-2509-36 36” (914mm)
SA-2509-42 42" [1067mm]
DIMENSION “A”
SA-2509-24 27” (686mm)
SA-2509-36 39“ (991mm)
SA-2509-42 45" [1143mm]
A
B