Installation Guide

SPEAKMAN
®
S-3014 Installation, Operation & Maintenance Instructions
ANYSTREAM
®
SHOWERHEAD
DESCRIPTION
Polished chrome plated ANYSTREAM
®
S-3014 Showerhead with a 3-3/4” outer spray adjustment ring. 5 self-
cleaning plunger nozzles resist scale build-up and provide 45 spray streams for a full body coverage pattern.
The center core nozzle delivers twelve massaging jets and a combination spray is included. Water conserving
pressure compensating AUTOFLO® device reduces flow to 2.5 GPM/9.46LPM maximum, to meet existing ANSI
A112.18.1 Standard. ½” NPT inlet.
SPECIFICATIONS
SUPPLY INLET: ½” NPT
FLOW RATE: 2.5 GPM/9.46 LPM MAX
SHIPPING WEIGHT: 1.0 LBS.
STATIC PRESSURE: 20-80 PSI
INSTALLATION
Remove the old shower head from the shower arm. Clean off any debris on the threads of the shower arm.
Wrap Teflon tape around the shower arm threads in a clockwise direction. Turning in a clockwise direction,
screw the new Speakman shower head onto the shower arm. Tighten with a wrench. Turn the water supply on
and check for leaks.
OPERATION
To adjust the spray pattern of the shower head, simply rotate the outer ring to the desired spray (Full-Body,
Dual action or Massage). The outer ring can rotate 360°.
MAINTENANCE
The gleaming finish of your SPEAKMAN ANYSTREAM
®
shower head can be cleaned by using mild soap and
warm water. Dry immediately with a soft, clean cloth for best results. The flow control device limits water flow to
2.5 gallons per minute. The small orifices may become clogged with scale and other minerals found in potable
water. To clean the flow regulator, simply remove the shower head from the bent arm, dislodge the flow
regulator which is located in the inlet and clean as necessary.
ROUGH-IN MEASUREMENTS
SPEAKMAN
®
400 Anchor Mill Rd. New Castle, DE 19720 Phone: [phone] Fax: [phone]
12/12 Visit us on the web at www.speakmancompany.com 92-S-3014-R2