Specification

THIS SPACE FOR ARCHITECT/ENGINEER APPROVAL.
400 ANCHOR MILL ROAD | NEW CASTLE, DE 19720
P: 800-537-2107 | F: 800-977-2747
WWW.SPEAKMANCOMPANY.COM
REVISION DATE: JANUARY 2014
SPECIFICATION
364
NOTE: 1. All dimensions are in inches (millimeters) unless otherwise specified and are
subject to change without notice.
Management Systems
Registered to ISO 9001
SPEAKMAN
®
Arm & Flange S-2530
SPEAKMAN
®
400 Anchor Mill Rd. New Castle, DE 19720 Phone: [phone] Fax: [phone]
12/12 Visit us on the web at www.speakmancompany.com 92-S-2530-R2
SPEAKMAN
®
S-2530 Shower Arm Installation, Maintenance & Operation
Instructions
DESCRIPTION
Speakman polished chrome plated brass curved shower arm.
SPECIFICATIONS
½” NPT MALE INLET
½” NPT MALE OUTLET
SHIPPING WEIGHT: 1.6 LBS.
INSTALLATION
Speakman recommends the use of a qualified plumber to properly install the cast brass shower arm and to size(L)
The ½”-14 NPT threaded nipple. Make sure the shower arm is tightened completely to prevent leaks. Speakman
does not supply threaded nipple due to different wall constructions.
MAINTENANCE
The gleaming finish of your SPEAKMAN S-2530 shower arm can be cleaned by using mild soap and warm water.
Dry immediately with a soft, clean cloth for best results.
ROUGH-IN MEASUREMENTS
NOTE: 1. Speakman reccommends the use of a qulaied plumber to properly install the cast
brass shower arm and to size the ½ - 14 NPT threaded nipple. Make sure the shower arm is
tightened completely to prevent leaks. 2. All behind wall piping not supplied. 3. Must have
8” of clearance 360° around centerline of shower arm for proper installation.
4. All dimensions are in inches (millimeters) unless otherwise specied and are subject to
change without notice.