Installation Guide

01/11
REV 2
92-1807
SPEAKMAN COMPANY
S-2500 Installation, Maintenance & Operation Instructions
SHOWER ARM AND FLANGE
DESCRIPTION
Speakman polished chrome plated brass 7” shower arm with brass wall flange.
SPECIFICATIONS
½” NPT MALE INLET
½” NPT MALE OUTLET
SHIPPING WEIGHT: 0.7 LBS.
INSTALLATION
Slip wall flange onto shower arm. Apply teflon tape or pipe dope to male inlet threads and thread arm into supply
piping behind the wall. Wrench tighten. Slip wall flange flush to wall. Check connection for leaks.
MAINTENANCE
PB: Polish Brass 
BN: Brushed Nickle
PN: Polished Nickel ORB: Oil Rubbed Bronze
Product improvements may cause
specification and dimensional
changes without notice.
The gleaming finish of your SPEAKMAN S-2500
shower arm can be cleaned by using mild soap and
warm water. Dry immediately with a soft, clean cloth
for best results.
ROUGH-IN MEASUREMENTS
OPTIONS
SPEAKMAN
®
PO Box 191 Wilmington, DE 19899 Phone: [phone] Fax: [phone]
Visit us on the web at www.speakmancompany.com