Specification

SPEAKMAN

400 ANCHOR MILL ROAD

NEW CASTLE, DE 19720

800-537-2107

800-977-2747

WWW.SPEAKMAN.COM

OCTOBER 2017

Architect/Engineer Approval Space:

S-2460

FEATURES:

• Vandal-resistant standard

• 1/2 in. NPT inlet

• Solid brass wall mounted showerhead

• 2 in. face 60 spray channels at three dierent angles

to allow a full coverage shower

• Drilled for, but less mounting bolts

• Water conserving pressure compensating Autoﬂo® device

reduces ﬂow to a maximum of 2.5 gpm (9.46 L/min) ﬂow rate

FINISH:

OPTION:

Add sux to model #

• Anchor plate assmbly with mounting screws ❑ -AP

COMPLIANCE:

• ASME A112.18.1/CSA B125.1 standard

WARRANTY:

• 5 year limited

Commercial Brass Showerhead

PAGE 1
S-2460 Commercial Brass Showerhead FEATURES: • Vandal-resistant standard • 1/2 in. NPT inlet • Solid brass wall mounted showerhead •2 in. face 60 spray channels at three different angles to allow a full coverage shower • Drilled for, but less mounting bolts •W ater conserving pressure compensating Autoflo® device reduces flow to a maximum of 2.5 gpm (9.46 L/min) flow rate FINISH: PC OPTION: Add suffix to model # • Anchor plate assmbly with mounting screws ❑ -AP COMPLIANCE: •A SME A112.18.
PAGE 2
Apply pipe thread tape in a clockwise direction to threads of supply nipple. Pipe joint compound may be used instead of tape. Turning in a clockwise direction, thread the showerhead on to the supply nipple. Tighten & position with a strap wrench or a pair of soft jaw pliers. Mark and drill holes for mounting screws (not provided). Note: If necessary, remove showerhead and1. All use proper are screw anchor (3)(not provided). Turn the water supply on and check for2. leaks.