Dimensions Guide

THIS SPACE FOR ARCHITECT/ENGINEER APPROVAL.

400 ANCHOR MILL ROAD | NEW CASTLE, DE 19720

P: 800-537-2107 | F: 800-977-2747

WWW.SPEAKMANCOMPANY.COM

REVISION DATE: JANUARY 2014

SPECIFICATION

257

Management Systems

Registered to ISO 9001

SEE REVERSE FOR ROUGH-IN DIMENSIONS

SPEAKMAN

Commercial Brass Showerhead

S-2280

FEATURES:

• Vandal-resistant standard.

• ½ in. NPTF inlet.

• 3½ in. square brass shank

• Spray adjusting T-handle

• Brass rigid ball joint

• Flow control device reduces ow to 2.5 gpm/9.46 L/

min maximum

COMPLIANCE:

• Meets existing ASME A112.18.1/CSA B125.1

Standard

FINISH:

• Polished Chrome (standard)

OPTIONS:

ADD SUFFIX TO MODEL #

• Anchor plate assmbly with mounting screws ❑ -AP

• Ball joint ❑ -BJ

• S-2252 Anystream showerhead ❑ -2

WARRANTY:

• 1 year limited

PAGE 1
SPEAKMAN ® S-2280 Commercial Brass Showerhead SPECIFICATION FEATURES: • Vandal-resistant standard. • ½ in. NPTF inlet. • 3½ in. square brass shank • Spray adjusting T-handle • Brass rigid ball joint • F low control device reduces flow to 2.5 gpm/9.46 L/ min maximum COMPLIANCE: •M eets existing ASME A112.18.1/CSA B125.
PAGE 2
SPEAKMAN ® f the showerhead, simply rotate the handle to the desired spray (needle spray, gentle Commercial Showerhead S-2280 SPECIFICATION SPEAKMAN WATERSAVER® showerhead can be cleaned by using mild soap and y with a soft, clean cloth for best results. The flow control device limits water flow to 2.5 all orifice may become clogged with scale and other minerals found in potable water.