Specification

SPEAKMAN

400 ANCHOR MILL ROAD

NEW CASTLE, DE 19720

800-537-2107

800-977-2747

WWW.SPEAKMAN.COM

OCTOBER 2017

Architect/Engineer Approval Space:

S-2280

FEATURES:

• Vandal-resistant standard.

• 1/2 in. NPTF inlet.

• 31/2 in. square brass shank

• Spray adjusting T-handle

• Brass rigid ball joint

• 2.5 gpm (9.45 L/min) ﬂow rate

• 4 Plungers, 32 sprays

FINISH:

OPTION:

Add sux to model #

• Anchor plate assmbly with mounting screws ❑ -AP

• Ball joint ❑ -BJ

COMPLIANCE:

• ASME A112.18.1/CSA B125.1 standard

WARRANTY:

• 5 year limited

Commercial Brass Showerhead

PAGE 1
S-2280 Commercial Brass Showerhead FEATURES: • Vandal-resistant standard. • 1/2 in. NPTF inlet. •3 1/2 in. square brass shank • Spray adjusting T-handle • Brass rigid ball joint •2 .5 gpm (9.45 L/min) flow rate • 4 Plungers, 32 sprays FINISH: PC OPTION: Add suffix to model # • Anchor plate assmbly with mounting screws • Ball joint ❑ -AP ❑ -BJ COMPLIANCE: •A SME A112.18.1/CSA B125.
PAGE 2
NOTE: 1. All dimensions are in inches (millimeters) unless otherwise specified and are subject to change without notice. 2. Unless otherwise DIMENSIONS: all inlets and handle outlets are 1/2” to female NPT threads. f the showerhead, simplyspecified, rotate the the desired spray (needle spray, gentle SPEAKMAN WATERSAVER® showerhead can be cleaned by using mild soap and y with a soft, clean cloth for best results. The flow control device limits water flow to 2.