Specification Sheet

SPEAKMAN
400 ANCHOR MILL ROAD
NEW CASTLE, DE 19720
800-537-2107
800-977-2747
WWW.SPEAKMAN.COM
OCTOBER 2017
Architect/Engineer Approval Space:
P:
F:
W:
R:
10
11/10
REV 1
92-3172
SPEAKMAN
®
PO Box 191 Wilmington, DE 19899 Phone: [phone] Fax: [phone]
Visit us on the web at www.speakmancompany.com
SPEAKMAN COMPANY
S-2272-E2 Installation, Maintenance & Operation Instructions
COSMOPOLITAN ® SHOWERHEAD
DESCRIPTION
Polished chrome plated COSMOPOLITAN showerhead. Chrome plated brass ball joint. Flow control device
reduces flow to 2.0 GPM/ 7.6LPM maximum, to meet existing ANSI A112.18.1 Standard. ½” NPT inlet.
SPECIFICATIONS
SUPPLY INLET: ½” NPT
FLOW RATE: 2.0 GPM/ 7.6LPM MAXIMUM
SHIPPING WEIGHT: LBS.
INSTALLATION
Apply pipe thread tape in a clockwise direction to threads of shower arm. Pipe joint compound may be used instead
of tape. Turning in a clockwise direction, thread the shower head on to the shower arm. Tighten with a pipe wrench
or a pair of pliers. Turn the water supply on and check for leaks.
OPERATION
Spray pattern of showerhead is a fixed spray, and there is no adjustment.
MAINTENANCE
Product improvements may
cause specification and
dimensional changes
without notice.
The gleaming finish of your SPEAKMAN COSMOPOLITAN® showerhead can be cleaned by using mild soap and
warm water. Dry immediately with a soft, clean cloth for best results. The flow control device limits water flow to 2.0
gallons per minute. The small orifice may become clogged with scale and other minerals found in potable water. To
clean the flow control, simply remove the shower head from the bent arm, unscrew the flow control and clean as
necessary.
ROUGH-IN MEASUREMENTS
DIMENSIONS:
NOTE: 1. All dimensions are in inches (millimeters) unless otherwise specied and are subject to change without notice. 2. Unless otherwise
specied, all inlets and outlets are 1/2” female NPT threads.