Installation Guide

Instructions for Models:
CPT-10000-P
Need Help?
For additional assistance or service call:
SPEAKMAN Company
400 Anchor Mill Road
New Castle, DE 19720
PHONE: [phone]
EMAIL: [e-mail]
WEB: www.speakmancompany.com
92-CPT-10000-P-R1
What You Need To Know:
Tools:
Required:
*Phillips Screwdriver
Helpful:
*Tape Measure
Important Notes:
Be sure to read instructions thoroughly before
beginning installation. Do not overtighten any
connections or damage may occur.
Be sure to have properly adjusted the
Temperature Limiting Stop (TLS) as per the
Valve Installation Instructions before installing
Valve Trim.
Safety Tips:
Cover your drain to prevent loss of parts.
Maintenance:
Your new Valve Trim is designed for years
of trouble-free performance. Keep it looking
new by cleaning it periodically with a soft cloth.
Avoid abrasive cleaners, steel wool, and harsh
chemicals as these will dull the finish and void
your warranty.
①
Clean wall surface. Place Mounting Base①
on to valve, align mounting holes, and secure
with screws②.
②
③
④
*IMPORTANT*
⑤
⑥
There are 2 Connectors③ included to allow for
both Shallow and Deep mount applications.
Please select Connector appropriate for your
installation.
Confirm that the valve is in the “OFF” position.
Place appropriate Connector③ on spindle of
valve making sure to orient the Connector so that
one set of splines are in a perfectly vertical
position.
When installed correctly the Connector③
should protrude from the Mounting Base
inbetween 5/16” and 1”. Secure with Screw④.
Place Escutcheon⑤ on Mounting Base. Take care
to orient Escutcheon as shown below.
Align Handle Assembly⑥ with Connector and
Escutcheon. Keep Handle in a stationary
vertical position as you thread Handle Hub
on to Mounting Base. Tighten until snug.
2
1
For Deep Mount
Application
For Shallow Mount
Application
3
4
5/16"-1"
3
5
6B
6A
6B
6A