Instructions

X X
√
4
3
Installers must verify that the supporting surface will safely support the combined weight of
the equipment and all attached hardware and components.
WARNING
2b. For Solid Brick and Concrete Mounting
Drill pilot holes
1
2
Screw the wall
mount onto
the wall
WARNING
• Make sure that mounting screws are anchored into the center of the studs. The use of a stud
finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
2a. For Wood Stud Wall Mounting
2
1
Drill pilot holes
3
Screw the wall
mount onto
the wall
X X
√
1.Separating the VESA Plate from the Wall Mount
ø 4.5mm
(ø 3/16")
55mm
(2.2")
55mm
2.2"( )
55mm
(2.2")
60mm
(2.4")
60mm
2.4"( )
60mm
(2.4")
ø 10mm
(ø 3/8")
Find and mark the
exact location of
mounting holes
Mark the exact
location of
mounting holes
W-A
W-C
W-A
W-C
W-B
loosen
remove
I
XX