Information

• Check all screw fastenings from time to time (at least every 3 months). Screw fastenings may
eventually loosen over time due to the adjustment and handling of the TV set and/or the TV
cart. Always ensure that the product is in a stable and safe condition.
• Do not apply force when handling/adjusting the TV set and/or the TV cart as this may cause
damage to the TV set.
• Do not press on the TV set display when handling/adjusting!
• Do not overload the TV cart. Take note of the manufacturer's specications for the maximum
weight and/or size of the TV set.
• Do not use the TV cart to lean or hold on it.
• Do not attach any objects to the TV mount of the TV cart other than the designated TV set.
• Consider a stable attachment due to the weight of the TV set, TV cart, and the leverage.
• Observe the safety notes in the operating instructions for the TV set.
• TV sets generate heat. Risk of re! Take appropriate precautions with regard to heat
dissipation and re prevention. Certain surfaces can be damaged or discoloured as a
result of heat dissipation. Take appropriate protective measures.
• In case of doubt, do not perform installation yourself; leave it to a professional.
Care and cleaning
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the housing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
Important information
General safety instructions for TV carts
Dear customer,
TV carts allow mounting of TV sets on them. TV sets with different screen sizes can be mounted
on the TV carts. The TV set can be adjusted in height, panned, tilted or even turned depending
on the TV cart. Therefore, the orientation of a TV set can be optimally adapted to your needs.
There are a few important safety instructions which must be observed during installation, so
please read the following sections carefully.
General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material unattended, as it may become a dangerous toy for children.
• The product is intended for dry indoor use only.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity
and moisture.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorized
use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Observe the enclosed installation instructions.
• Check the contents of the packaging before assembling the product. Do not assemble the
product if any parts are missing.
• Make sure that no unauthorised persons such as playing children are in the installation area
during installation.
• Choose a suitable and sufciently large installation site. The installation should be carried out
on a horizontal, rm, dry, and clean surface. If necessary, use a protective underlay at the
installation site to protect the product and the oor from scratches. The improperly selected
installation site can cause personal injury or property damage!
• Use care when assembling and/or installing! The product has some sharp edges and there
is a risk of injury!
• Perform the work with two people because the TV cart and TV set are heavy. Additional lifting
tools or a third person may be necessary depending on the weight.
• Only perform the works required to install (or adjust) the TV cart. Never attempt to perform
any alterations or repairs. Some TV carts contain heavily preloaded metal springs. In case of
improper disassembly, there is a risk of serious injuries!
• Before starting the installation, check that there are suitable mounting options for the TV cart
on the back of the TV set.
• As a rule, the existing base of the TV set must be removed before mounting the TV set on a
TV cart. In this case, follow the operating instructions for your TV set.
• Place the TV set at with its display side down on a soft, clean surface so that there is no
pressure or scratches on the display. Use a suitable underlay to protect valuable furniture
surfaces during installation.
• After that, remove the existing base, which is xed with screws or clips depending on the
TV set.
• Set/tighten the brakes on the TV cart, if any.
• Make sure that the correct screws are used when installing the TV cart on the back of the TV
set. They must have the proper thread for the TV set and must not be too long, otherwise the
TV set will be damaged.
• However, the screws must not be too short, otherwise there will be no secure connection.
The screws should be screwed into the corresponding thread of the TV set with at least 5
complete 360° thread turns.
• In general, appropriate screws are included for the TV cart or the TV set; in individual cases,
however, other commercially available screws are required depending on the TV set.
• Do not apply force when tightening as this may destroy the TV set and result in loss of
warranty/guarantee!
• For the avoidance of any doubt as to the proper screw length, we recommend that you
contact the TV set manufacturer or a corresponding specialist.
• Use extreme care when installing as falling and/or overturning of the TV set and TV cart can
not only cause costly consequential damage, but also increase the risk of injury!
• If there are any glass components, handle them with extreme care. Glass can break. Risk
of injury!
• Lay all TV set cables so that they are not jammed or kinked.
• Do not overtighten the screws. Overtightening causes damage to the thread and can
adversely affect the strength of the screws.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE. *tv_cart_v1_0518_02_hs_en