User Manual

Warranty card
We offer 12-month warranty
service for the product from the date of purchasing.
Purchase Date
Model No.
Customer Name
Customer
Address
Sales Unit
Series No.
Repair Date
Tel
Description of Malfunctions
Short
circuit
protection
Voltage
stabilization
protection
Curre nt re turn
chargin g pro tecti on
Over
discharge
protection
Overload
protection
Our product’s quality is underwritten by
Allianz Property and Casualty Company Limited
Wide
temperature
ignition
Balanced
charge
Quality commitment
12 million RMB sum insured
Standard: GB/T 18287- 2000
★
1. Q: How to turn off the device ?
2. Q: How long does it take to charge this device fully ?
A: By adopting the intelligent IC management system, intelligent detection
charging environment and intelligent matching the most secure current of
the digital devices for the intelligent charging, and the maximum current can
reach3A, it takes about 1-2 hours to fully charge the phone.
4. Q: How many times can the device start the vehicles if the
power capacity is 100 %?
5. Q: How to maintain the device when not in use ?
6. Q: If the product is not being used after fully charge, how long can be stored
to start the car ?
A: 1) Please check the power capacity of the device and make sure there are two lights
on (50% capacity) which can start the vehicles.
Frequently Asked Questions(FAQ):
A: This device has function of intelligent detection, in the case of no load or
the charging completed, it will power off automatically, which could prevent
power loss and make service life longer.
A: It takes 3-5 hours to fully charge the device using the 12V/1A or 15V /1A
charger our company equipped.
3. Q: How long can this device charging for the mobile phone ?
A: Depending on different displacement and car motor, the device can
intermittently continuous start the car under 3.0 displacement for over 30
times.
A: The recommended temperature setting is 0 ℃ -40 ℃, please keep the
device far from liquid, open fire or heating objects, do not storage the device
in a damp place. The storage age is 3-6 months, while please charge the
product every 3 month, to prolong the service life.
A: If the products are not being used in 3-6 months, and product of more
than 50% of the electricity there, you can normally start the car, if there
is 10 % electricity left, you can use them for charging the digital products.
7. Q: If the device can not start the car, how to solve it ?
★Indicator Light Instruction:
Press the on-off key to check the power status; The data displayed
is the percentage of the actual power(25% 50% 75% 100%).
With an indicator light when charging.
★Trouble Shooting:
If the following operations are unable to troubleshoot, please stop
using the jump starter and contact
Cause
Solution
Trouble
The power capacity
of the device is sho
-wn in 100%, but did
not fully charged in
charging process
The indicator light of the device
indicates four lights on means
stop charging, and this situation
means it is semi-state of charge,
which is conducive to long-term
storage when the device is not in
use for long time.
Pull out the charge
plug, then reinsert.
Nothing happens wh
-en pressing the swi
-tch button
Low voltage protection of the
device is started and the dev
-ice can not be turned on.
Inser t the charg er p
-lug in to the 12V2 A
input p ort to acti vate.
★Warning:
1.After starting the vehicle, for safety, please remove the
device ASAP.
2.For safety, please do not connect the two clamps directly when
they are connected to the device and the device is tuned on
3.For safety, please do not dismantle the device.
4.Please do not dismantle the device, otherwise no warranty.
Do not use the product in bathroom or other damp places or places
near the water.
Do not remodel or dismantle the device.
Keep the product away from the children.
Do not reverse the connections of output or input.
Do not throw the product into fire.
Please don’t use the charger whose charging voltage
is more than the product to charge.
！
The temperature should be kept between 0℃ to 40℃ when the
device is being charged.
！
Do not hit or throw the product.
If there is problem with charging, please contact your dealer.
！
If the liquid of the device is splashed into eyes, do not wipe the eyes
but wash them with clean water immediately.
！
If the product is heating and discolouring, please stop using, as
it may lead to liquid, smoke and burn.
！
Keep the product away from the flammable objects(Bed or carpet)
！
After long term storage or not in use, please ensure that devices
will be charged and discharged in every three months.
★
No.
Name
Quantity
1 2
3
4
5
6
7
8
Main
device
USB
charging
wire
laptop
charing
wire
12V
charger
Car
charger
storage
battery
clamps
Instruction
manual
Certificate
of
inspection
1 1 1 1 1 1 1 1
Note: Accessories will be subject to the packing.
★Operating Instruction:
Charging for the devices
1 Inserting the matched adapter into socket；.
2 Inserting the adapter into 12V or15V input port of the devices..
1 Inserting the one end of car charger into the jack of cigar lighter.
2 Inserting the other end of car charger into the devices..
OR
Starting 12V Auto
1. Make sure the electric quantity is no less than 50%
More than two indictor lights will be lighting
2 Clamp positive pole of the battery with Red clip, negative pole of
the battery with Black clip;
.
3 Insert the devices connector into the 12V START terminal on the
product;
.
4 Turn the key to ON’ and start the vehicle;. '
5 Once the vehicle is started, remove the end of the clamps from
the device immediately;
.
Charge digital product with 5V
1.Choosing suitable and intelligent charge connector. Then inserting the
USB connector into 5V USB output port.
2.Connecting the charge connetor with intelligent equipment, such as
laptop, smartphone, bluetooth and so on.
3.Automatic idetification. charge iphone automatically, laptop and other’s
electronic product.
For example:(charging the iphone / ipad)
Charge for 12v/16v/19v laptop
1.Selecting suitable charge connector of computer and connect it.
2.Pressing the swich lightly and start the power source.
3.Pressing the swich again to change different Volt. the relevant LED
flashing will be blink. the voltage will be auto locked automatically after
three seconds. different computer have different voltage in the market.
Please make sure the computer’s volt that you used.
Take charing for 19v laptop as an example:
How to turn on the LED emergency light
1.Short press the power switch and start the device.
2.Press the switch for 3 seconds. The LED light system starts at a continous
lighting state.
3.Short Press the switch once again. The flash light is turned on.
4.Short Press the switch one more time. The light gives out SOS signal.
5. Short Press the switch another time. The light is turned off.
Accessaries List:
Swich the volt
Volt indictor
Pressing this button for 3 second
can turn on the LED lighting system
19V/16V/12V indictor
12V auto automatic port
LED indictor light
Switch
5V output port
LED flashlight
15V input port of charge
19V/16V/12V intelligent output port
User Manual of Multi-Function Jump Starter
2) Please check the clamps tightly or not and make sure the positive and negative is
not wrongly. The right way is that Red with red and Black with black after holding
tightly which is the positive clamp and negative clamp of the device respectively
connected with the positive clamp and negative clamp of the vehicles,
and connect the EC5 connector with the device, twist-off the car keys to start the car
one time. If the startup failed, please wait a few seconds before the re-start
operations. If the start-up is successful, please quickly disconnect the clamps from
the vehicle’s battery to the device, then please remove the clamps from the vehicle’s
battery.
3) Please check the vehicle’s battery if it is under charge or not, if yes, please follow step
2 to start the vehicle and the vehicle’s battery will be automatically charged.
4.Connecting the computer’s connector with power source in 15 seconds,
the computer can be charged.
5.If you need to reselect the Volt ,please turn off the computer and power
source. After 15 seconds. when the power source auto-off, starting it
from the first step again.
Warranty conditions:
Please show this warranty card and fill in the details to obtain warranty
service. We offer 12-month warranty for the product from the date of
purchase.
Warranty range:
Quality problems in the state of normal use can be guaranteed.
Damages to the product caused by the operational errors. Warranty
can’t be provided.
The device is dismantled, no warranty.
Product’s sticker is torn off, no warranty.
We can provide maintenance service to the product that is beyond
the scope of warranty, but the demander need to pay maintenance.
OFF/ON
5V/1A Input Port
us at spartanpower.com