User Manual

31
3. All measurement results are permanently
deleted !
Aborng the deleon process
If you do not perform any acon aer step 1,
the monitor returns to the standard display
mode aer 10 seconds of inacvity.
The measurement results were not deleted.
The results are only deleted if you perform step
1 and push the buons as per step 2 within 10
seconds!
Note: Always delete the measurement results
with full baeries or if the device is connected
to the grid.
Troubleshoong
Unusual readout on the display
If the display has an unusual readout or the
buons do not react when pushed, an inialisa-
on must be performed.
1. Disconnect the device from the socket.
2. Hold and press
RESET buon about 3~4 seconds
Then it will be back to factory default seng.