User Manual

Overload warning
With this funcon, you can specify the current
22
value (15 A max.) and power (1800 W max.), at
which the device will issue an overload warning
If one of the overload values is exceeded,
OVERLOAD blinks on the display and the cor-
responding value, A for amps or W for was, is
shown. A warning sound is also issued.
Entering the overload value for was (W)
1. Aer entering the value for the greenhouse
gas emissions push the buon
SET / OK .
2. The overload value
W or A will blink on the
display.
3. You can switch to W with the buon VALUE /+
or DISPLAY / -
4. Push the buon HISTORY
will blink on the display. You can enter the
desired number with the buons
VALUE / +
or DISPLAY / -
5. Push the buon HISTORY to switch to the
subsequent (second) number. You can enter
the desired number with the buons
VALUE /+
or DISPLAY / -