User Manual

16
8. Display area for Voltage(V), Current(A),
Power(W), Frequency(Hz), Power factor(cosφ),
Amax, Wmax;
9. Display area for Time, Total kWh, Total me,
Currency(€,$,£,Paper Money), 1st and 2nd tariff,
Total costs, Greenhouse Gas emissions(GHG)
10. Graphical representaon of energy consumpon
in the last 7 days or 7 months.
Sengs
To exclusively perform measurements (without
a cost calculaon), you can skip this secon and
connue with the topic “Performing measurements
” (starng on page 24).
Time
1. Depress the buon SET / OK for 3 seconds.
The me display will blink. Pressing the buon
SET / OK several mes will access the different
input opons. Select the me to be entered as
the me.
2. Set the hours ahead with the buon VALUE/+
and back with the buon DISPLAY / -
3. Select the minutes with the buon HISTORY
Set them ahead with the buon VALUE / +
and back with the buon DISPLAY / -