Operation Manual

3
Original instructions
EN
Technical specications
Model: BBK2 1500 BBK3 1500
▪ Power input: 1500 W 1500 W
▪ No load speed 950 / 2100 min
-1
950 / 2100 / 4200 min
-1
▪ Spindle thread
- inner G ½” G ½”
- outer UNC 1 ¼” UNC 1 ¼”
▪ Core bit capacity
- in masonry 20 - 200 mm 10 - 200 mm
- in concrete 20 - 152 mm 10 - 152 mm
▪ Water feed system maximum pressure 3 bar 3 bar
▪ Weight (EPTA Procedure 01/2003) 5.6 kg 5.8 kg
▪ Protection degree IP20 IP20
▪ Protection class (EN 60745-1)
I / I /
NOISE AND VIBRATION INFORMATION
▪ Noise emission (Measured values determined according to EN 60745.)
A-weighted sound pressure level L
pA
89 dB(A) 89 dB(A)
Uncertainty К
pA
3 dB 3 dB
A-weighted sound power level L
wA
100 dB(A) 100 dB(A)
Uncertainty К
wA
3 dB 3 dB
Wear hearing protection!
▪ Vibration emission *
Total vibration values (vector sum in the three axes) determined according to EN 60745:
Vibration emission value a
h,DD
8.8 m/s
2
8.8 m/s
2
Uncertainty K 1.5 m/s
2
1.5 m/s
2
* The vibration emission values are determined according to 6.2.7 EN 60745-1.
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for
different applications, with different accessories or poorly maintained, the vibration emission may differ. This may
signicantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This may signicantly reduce the exposure level over the total
working period.
Maintain the power tool and the accessories and keep your hands warm during operation to reduce the harmful effect
of vibrations.
Dust from material such as paint containing lead, some wood species, minerals and metal may be harmful. Contact
with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to the operator or bystanders.
Certain kinds of dust are classied as carcinogenic such as oak and beech dust especially in conjunction with additives
for wood conditioning (chromate, wood preservative). Material containing asbestos must only be treated by specialists.
▪ Where the use of a dust extraction device is possible it shall be used.
▪ The work place must be well ventilated.
▪ The use of a dust mask of filter class P2 is recommended.
Follow national requirements for the materials you want to work with.
pages-BBK2[3]1500.indd 3 9.7.2014 г. 10:22:50 ч.