User's Manual

14
5.5.2.1 Standard mode:
nView disabled, only one monitor will work. Click Device Settings >> , you can select
output device – CRT or TV. Or you can select Advanced … and select output device.
Click Video output format bar to
select S-Video or RCA (Composite
Video) output, default is S-Video Out. It
is better choose the right out put device,
Do not use Auto select.
Click Change Format to select your
country and TV system – NTSC or PAL, no
SECAM.
Note:
If you can not switch from PAL back to
NTSC, please set resolution to 640x480
and try again