User's Manual

12
5.5.2.1 Standard mode:
nView disabled, only one monitor will work. Click Device Settings >> , you can select
output device – CRT or TV. Or you can select Advanced … and select output device.
Click Video output format bar to select
S-Video or RCA (Composite Video) output,
default is S-Video Out. It is better choose the
right out put device, Do not use Auto select.
Click Change Format to select your
country and TV system – NTSC or PAL,
no SECAM.
Note:
If you can not switch from PAL back to NTSC,
please set resolution to 640x480 and try again