Specifications

Wireless Module
All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice.
www.sparklan.com / [e-mail] / [phone]
WPEQ-405AX
Ver.0.94
Pin Assignment (TBD)
The following section illustrate signal pin-outs for the module connector.
TOP
Pin# Pin Name Type Description
1
WAKE#
－
Open Drain active Low signal. When the add-in card
supports wakeup, this signal is used by the add-in card to
request that the system return from a sleep/suspended
state to service a function initiated wake event.
When the add-in card supports the OBFF mechanism,
this signal is used by the system to indicate OBFF or CPU
Active State transitions.
3 NC
－
No connect
5
NC
－
No connect
7 PCIE_CLKREQ_L OD PCIe clock request
9 GND G Ground connections
11
REFCLK-
I PCIe differential clock input- Negative
13
REFCLK+
I PCIe differential clock input- Positive
15 GND G Ground connections
17
NC
－
No connect
19
NC
－
No connect
21 GND G Ground connections
23 PCIE_TDN O PCIe Transmit data-Negative
25 PCIE_TDP O PCIe Transmit data-Positive
27 GND G Ground connections
29 GND G Ground connections
31 PCIE_RDN I PCIe receive data-Negative
33 PCIE_RDP I PCIe receive data-Positive
35 GND G Ground connections
37 GND G Ground connections
39 VDD_3V3_SIP P VDD system power supply input
41 VDD_3V3_SIP P VDD system power supply input
43 GND G Ground connections
45
PCIE_L1_TXM
－
WLAN PCIe L1 transmit output differential signals
47
PCIE_L1_TXP
－
WLAN PCIe L1 transmit output differential signals
49
PCIE_L1_RXM
－
WLAN PCIe L1 receive input differential signals
51
PCIE_L1_RXP
－
WLAN PCIe L1 receive input differential signals