User's Manual
Table Of Contents
- Chapter 1Introduction
- Chapter 2Installation
- Chapter 3Setup
- Chapter 4PC Configuration
- Chapter 5Operation and Status
- Chapter 6Advanced Features
- Chapter 7Advanced Administration
- Appendix ATroubleshooting
- Appendix BAbout Wireless LANs
- Appendix CSpecifications
Wireless Router User Guide
78
Options
This screen allows advanced users to enter or change a number of settings. For normal
operation, there is no need to use this screen or change any settings.
An example Options screen is shown below.
Figure 45: Options Screen
Data - Options Screen
Backup DNS
IP Address
Enter the IP Address of the DNS (Domain Name Servers) here. These
DNS will be used only if the primary DNS is unavailable.
UpnP
Enable UPnP
Services
• UPnP (Universal Plug and Play) allows automatic discovery and
configuration of equipment attached to your LAN. UPnP is by
supported Windows ME, XP, or later.
• If Enabled, this device will be visible via UPnP.
• If Disabled, this device will not be visible via UPnP.
Allow
Configuration...
• If checked, then UPnP users can change the configuration.
• If Disabled, UPnP users can only view the configuration.
Allow Internet
access to be
disabled
• If checked, then UPnP users can disable Internet access via this
device.
• If Disabled, UPnP users can NOT disable Internet access via this
device.