User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Installation
- Chapter 3 Setup
- Chapter 4 PC Configuration
- Chapter 5 Operation and Status
- Chapter 6 Advanced Features
- Chapter 7 Advanced Administration
- Appendix A Troubleshooting
- Appendix B About Wireless LANs
- Appendix C Specifications
Wireless Router User Guide
68
Connecting to the Virtual Servers
Once configured, anyone on the Internet can connect to your Virtual Servers. They must use
the Internet IP Address (the IP Address allocated to you by your ISP).
e.g.
http://203.70.212.52
ftp://203.70.212.52
It is more convenient if you are using a Fixed IP Address from your ISP, rather than Dynamic.
However, you can use the Dynamic DNS feature, described in the following section, to allow
users to connect to your Virtual Servers using a URL, rather than an IP Address.