User Manual

4.4.6 Auto Provision
The function is only applicable when your WIFI-ATA needs to get the configuration file
that is provided by specific service providers, like IP-PBX or UTStarcom. If it is the
case, then you don’t need to configure the SIP related settings. For more information,
please contact with your service provider.
Service ProviderSelect the service provider. (only for ZT-9050.) or UTStarcom
(UTSI profile).
Provision Type
Select how to get the configuration file.
TFTP first Get configuration file from TFTP server. If failed, get configuration file
from HTTP server later.
HTTP first Get configuration file from HTTP server. If failed, get configuration file
from TFTP server later.
Disable Do not get configuration file by provision.
TFTP Server AddressThe IP address or URL with file path of the TFTP provision
server.
TFTP Server PortThe port of the TFTP provision server.
HTTP Server AddressThe IP address or URL with file path of the HTTP provision
server.
HTTP Server Port
The port of the HTTP provision server.
Provision Expiry TimeThe system will get configuration file again after expiry
time.
33