User Manual
Table Of Contents
- Copyright Statement
- Federal Communication Commission Interference Statement
- 1.1 Advantages of VoIP to Businesses
- 1.2 SIP – Most Popular VoIP Protocol
- 1.3 VoIP-Friendly Networking Concepts
- 2.1 Operation Modes
- 2.2 Wireless Modes
- 2.3 Topologies of Network Application
- 3.1 Overview of WIFI-ATA
- 3.2 Key Features of WIFI-ATA
- 3.3 Outlook of WIFI-ATA
- 3.4 Web Configuration Environment
- 4.1 Quickly Setup (Setup Wizard)
- 4.2 Operation Mode
- 4.3 TCP/IP Settings
- 4.4 VoIP Settings
- 4.5 Wireless settings
- 4.6 Firewall settings
- 4.7 Management
- 5.1 How can I make a phone call?
- 5.2 How can I pick up the call waiting while I’m on the phon
- 5.3 How can I make a 3-way conference call?
- 5.4 How can I transfer a call to others?
- 5.5 Why can’t I login to the WIFI-ATA?
- 5.6 Why can’t I access the Internet?
- 5.7 Why can’t I make VoIP phone calls to others?
- 5.8 WIFI-ATA doesn’t respond correctly to key press sometime
SIP / Media Port：Configure the local SIP / Media Port. In most cases, you don’t need
to change it.
DTMF Relay：Dial Tone Multi Frequency(DTMF), which is used for sending to the SIP
server in ITSP. Basically, there are three kinds of DTMF type used in VoIP world.
Choose the one your ITSP allow you to use, otherwise you might encounter problems.
SIP / Voice Qos：Quality of Service(QoS), which is used for prioritizing the packets
based on urgency which is set in part of the packet. It’s very important in the VoIP
communication environment since data can always be re-sent so it’s not urgency at all.
Please note that selecting QoS can not guarantee the voice transmitting will be
expedited all the way. It just can ensure the packets through WIFI-ATA will be filtered
based on QoS type. If your router or other network devices do not support QoS, your
voice packet will be queued somewhere between caller and callee. For more
information about the QoS, please check IETF RFC documentaries about IP ToS.
Handset Volume
：The volume you hear from the headset if it’s a VoIP call.
Handset Gain：The volume you talk to the headset if it’s a VoIP call.
Caller ID Mode
：It is for selecting which kind of Caller ID system your phone supports.
Flash Time：Configure the flash hook time of your phone.
Country：Configure the country of your phone. In most case, it will be the same as
your current location country.
29