User Manual
Table Of Contents
- Copyright Statement
- Federal Communication Commission Interference Statement
- 1.1 Advantages of VoIP to Businesses
- 1.2 SIP – Most Popular VoIP Protocol
- 1.3 VoIP-Friendly Networking Concepts
- 2.1 Operation Modes
- 2.2 Wireless Modes
- 2.3 Topologies of Network Application
- 3.1 Overview of WIFI-ATA
- 3.2 Key Features of WIFI-ATA
- 3.3 Outlook of WIFI-ATA
- 3.4 Web Configuration Environment
- 4.1 Quickly Setup (Setup Wizard)
- 4.2 Operation Mode
- 4.3 TCP/IP Settings
- 4.4 VoIP Settings
- 4.5 Wireless settings
- 4.6 Firewall settings
- 4.7 Management
- 5.1 How can I make a phone call?
- 5.2 How can I pick up the call waiting while I’m on the phon
- 5.3 How can I make a 3-way conference call?
- 5.4 How can I transfer a call to others?
- 5.5 Why can’t I login to the WIFI-ATA?
- 5.6 Why can’t I access the Internet?
- 5.7 Why can’t I make VoIP phone calls to others?
- 5.8 WIFI-ATA doesn’t respond correctly to key press sometime
4.3 TCP/IP Set t ings
The third feature set of WIFI-ATA is about the TCP/IP networking which contains
“LAN interface” and “WAN interface“. If the operation mode is “Bridge”, only the LAN
interface settings are available. That means LAN/PC port, WAN port, and Wireless
network all use the LAN interface settings in bridge mode. If the operation mode is
“Gateway”, the LAN interface is to configure LAN port and Wireless network; the WAN
interface is to configure WAN port. If the operation mode is “WISP”, the LAN interface
is to configure WAN and LAN port; the WAN interface is to configure the Wireless
network.
4.3.1 LAN Interface
The LAN interface supports “Static IP”, “DHCP Client”, and “DHCP Server”. If you
want to use PPPoE connection, configure the operation mode to “Gateway” and set
the PPPoE account in the WAN Interface page.
The IP Address / Subnet Mask / Default Gateway fields are only available when you
use a static IP. It may be provide from the MIS or network provider.
IP Address
：Configure the Internet Protocol(IP) address of your local network.
Subnet Mask：It is used to identify the IP subnet network, indicating whether the IP
address can be recognized.
Default Gateway
：If you have a gateway device in your local network, you could
configure the gateway’s IP address here.
22