User's Manual

802.11g USB 2.0 WLAN
Module User Manual
12
Chapter 4. How to use the WLAN Utility(Station)
4.1 802.11g USB 2.0 WLAN Module Configuration Tools
If you use the WinXP OS , the “Zero Configuration” of WinXP will be disable first , then
WLAN Utility can be used.
Figure 4-1
4.2 Open the WLAN Utility .
The Window is as shown in “Figure 4-1”.
The module can be set at “Station” or “Access Point” Mode from the Mode drop down menu. Station
mode is selected for the document.
- You can site survey the neighboring SSID site by pressing the “Refresh”, then sites name and
signals strength of available SSID sites are shown on the “Available Network” field.
- Double click the SSID site from “Available Network” field, and the SSID can be connected
directly.
- The information of the SSID is shown on the “ Current Network Information”.
- Show the BSSID of connecting AP on the “Link Status” filed.
- “Signal Strength” and “Link Quality” shown on diagrammatic curve, and described with
percentage.
- Record the number of Tx frames on the filed of “Tx Frame”.
- Record the number of Rx frames on the filed of “Rx Frame”.