User's Manual

802.11g WLAN/Bluetooth Combo USB Dongle User Manual
33
 Check whether the Setup is success
Computer 1:
1. Enter into DOS MODE, and type “IPCONFIG”.
(Start -> Run -> Type cmd or command )
2. Check whether the IP address is 192.168.0.1, and the Subnet Mask is
255.255.255.0 (as shown above)
Computer 2:
1. IP address does not need to setup. The DEFAULT GATEWAY is
192.168.0.1.
2. Please follow the steps of “computer 1” to check whether the IP
address is 192.168.0.1