User's Manual

DRT-MAN-093
47/74
3.1.1.4 Battery Charger Components
A
B
D
C
A. Power Indicator : Indicate the power on/off status..
B. Charging Indicator : Indicate the charging status.
C. Battery Compartment : Insert the battery pack to charge.
D. DC Input : Connect the DC Adaptor to supply electrical power to the battery charger
3.1.1.5 Battery Pack Components
A
B
A. Charging Indicator : Indicate the charging status
B. Knob Latch : Rotate between on/off for battery swap
3.1.1.6 Charging Battery Pack
The battery pack supplies power to the detector. Be sure to use only the dedicated battery pack, and fully
charge it before use.
 Connect the power adaptor to the DC Input port of the battery charger. The power LED light in blue
indicates the direct current (DC) power is ON.
 Insert the battery pack into the battery charger. Charging starts automatically. The charge LED lights
appear green when the battery pack is being charged. When the battery pack is completely charged,
all levels of charge LEDs will illuminate.
 Gently pull the charged battery pack to remove it from the battery charger.