User's Manual

User’s Manual
69
Please click ‘Firewall’ menu on the left of web management interface, then click ‘Access
Control’, and the following message will be displayed on your web browser:
Enable MAC Filtering:
Check this box to enable MAC address based filtering, and please select ‘Deny’ or ‘Allow’
to decide the behavior of MAC filtering table. If you select deny, all MAC addresses listed in
filtering table will be denied from connecting to the network; if you select allow, only MAC
addresses listed in filtering table will be able to connect to the network, and rejecting all
other network devices.
Client PC MAC address:
Please input the MAC address of computer or network device here, dash ( - ) or colon ( : )
are not required. (i.e. If the MAC address label of your wireless device indicates ‘aa-bb-cc-
dd-ee-ff’ or ‘aa:bb:cc:dd:ee:ff’, just input ‘aabbccddeeff’
Computer Name:
Pull down the menu and all the computers connected to the router will be listed here. You
can easily to select the computer name without checking the IP address of the computer.
Comment:
You can input any text here as the comment of this MAC address, like ‘ROOM 2A
Computer’ or anything. You can input up to 16 alphanumerical characters here. This is
optional and you can leave it blank, however, it’s recommended to use this field to write a
comment for every MAC addresses as a memory aid.
Add: