User's Manual

User’s Manual

4.8 Firewall

Excepting NAT, this router also provides firewall function to block malicious intruders from

accessing your computers on local network. These functions include inbound attack

prevention, and block outbound traffics, like block URLs which have pre-defined keywords.

Please follow the following instructions to enable or disable firewall function:

Please click ‘Firewall’ menu on the left of web management interface, and the following

message will be displayed on your web browser:

Please select ‘Enable’ or ‘Disable’ to enable or disable firewall function of this router, the

click ‘Apply’ button, and the following message will be displayed on your web browser:

Please click ‘Continue’ to back to previous setup menu; to continue on other setup

procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait

for about 30 seconds while router is rebooting).

 Access Control

This function allows or denies computers with specific MAC address from connecting to the

network; it can also allow or deny computers with specific IP address, protocol, or port.