User's Manual

User’s Manual
65
Enable:
Check this box to enable special applications and uncheck this box to disable virtual server.
IP Address:
Input the IP address of the computer which you want to open the ports.
Computer Name:
Pull down the menu and all the computers connected to the router will be listed here. You
can easily to select the computer name without checking the IP address of the computer.
TCP Port to Open:
This is the out going (Outbound) range of TCP port numbers for this particular application.
UDP Port to Open:
This is the out going (Outbound) range of UDP port numbers for this particular application.
Comment:
The description of this setting.
Popula Applications:
This section lists the more popular applications that require multiple connections. Select an
application from the Popular Applications selection and click ‘Add’ to save the setting to
‘Current Trigger-Port Table.’
Add:
Add the setting to the ‘Current Trigger-Port Table.’
Reset:
Click ‘Reset’ will clear all above setting and you can set up again.
Current Trigger-Port:
All the settings for the special applications will be listed here. If you want to remove some
Special Application settings from the " Current Trigger-Port Table", select the Special
Application settings you want to remove in the table and then click "Delete Selected". If you