User's Manual

User’s Manual
61
Please click ‘Continue’ to back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait
for about 30 seconds while router is rebooting).
 Port Forwarding
This function allows you to redirect a single port or consecutive ports of Internet IP address
to the same port of the IP address on local network. The port number(s) of Internet IP
address and private IP address (the IP address on local network) must be the same. If the
port number of Internet IP address and private IP address is different, please use ‘Virtual
Server’ function, described in next section.
Please click ‘NAT’ menu on the left of web management interface, then click ‘Port
Forwarding’, and the following message will be displayed on your web browser:
Enable Port Forwarding:
Check this box to enable port mapping, and uncheck this box to disable port mapping.
Private IP:
Input the IP address of the computer on local network which provides internet service.
Computer Name:
Pull down the menu and all the computers connected to the router will be listed here. You
can easily to select the computer name without checking the IP address of the computer.