User's Manual

User’s Manual

 Wi-Fi Protected Setup (WPS)

Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless

network clients and this wireless router. You don’t have to select encryption mode and

input a long encryption passphrase every time when you need to setup a wireless client,

you only have to press a button on wireless client and this wireless router, and the WPS

will do the rest for you.

This wireless router supports two types of WPS: Push-Button Configuration (PBC), and PIN

code. If you want to use PBC, you have to push a specific button on the wireless client to

start WPS mode, and switch this wireless router to WPS mode too. You can push

Reset/WPS button of this wireless router, or click ‘Start PBC’ button in the web

configuration interface to do this; if you want to use PIN code, you have to know the PIN

code of wireless client and switch it to WPS mode, then provide the PIN code of the

wireless client you wish to connect to this wireless router. The detailed instructions are

listed follow:

Please click ‘Wireless’ menu on the left of web management interface, then click ‘WPS’,

and the following message will be displayed on your web browser: