User's Manual

User’s Manual

Please click ‘Continue’ to back to previous setup menu; to continue on other setup

procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait

for about 30 seconds while router is rebooting).

 Wireless Access Control

This function will help you to prevent unauthorized users from connecting to your wireless

router; only those wireless devices who have the MAC address you assigned here can gain

access to your wireless router. You can use this function with other security measures

described in previous section, to create a safer wireless environment.

Up to 20 MAC addresses can be assigned by using this function. Please click ‘Wireless’

menu on the left of web management interface, then click ‘Access Control’, and the

following message will be displayed on your web browser:

All allowed MAC addresses will be displayed in ‘MAC Address Filtering Table’ (1).

Delete Selected:

If you want to delete a specific MAC address entry, check the ‘select’ box of the MAC

address you want to delete, then click ‘Delete Selected’ button. (You can select more than

one MAC addresses).

Delete All:

If you want to delete all MAC addresses listed here, please click ‘Delete All’ button.