User's Manual

User’s Manual

Please click ‘Continue’ to back to previous setup menu; to continue on other setup

procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait

for about 30 seconds while router is rebooting).

 Wi-Fi Protected Access (WPA):

When you select this mode, the wireless router will use WPA encryption, and the following

setup menu will be shown on your web browser:

WPA Unicast Cipher Suite:

Please select a type of WPA cipher suite. Available options are: WPA (TKIP), WPA2 (AES),

and WPA2 Mixed. You can select one of them, but you have to make sure your wireless

client support the cipher you selected.

Pre-shared Key Format:

Select the type of pre-shared key, you can select Passphrase (8 or more alphanumerical

characters, up to 63), or Hex (64 characters of 0-9, and a-f).

Pre-shared Key:

Please input the WPA passphrase here. It’s not recommended to use a word that can

be found in a dictionary due to security reason.

After you finish WPA Pre-shared key setting, please click ‘Apply’ button and the following

message will be displayed on your web browser: