User's Manual

User’s Manual
49
Key Format:
There are two types of key format: ASCII and Hex. When you select a key format, the
number of characters of key will be displayed. For example, if you select ’64-bit’ as key
length, and ‘Hex’ as key format, you’ll see the message at the right of ‘Key Format’ is ‘Hex
(10 characters), which means the length of WEP key is 10 characters.
Default Tx Key:
You can set up to four sets of WEP key, and you can decide which key is being used by
default here. If you don’t know which one you should use, select ‘Key 1’.
Encryption Key 1 to 4:
Input WEP key characters here, the number of characters must be the same as the number
displayed at ‘Key Format’ field. You can use any alphanumerical characters (0-9, a-z, and
A-Z) if you select ‘ASCII’ key format, and if you select ‘Hex’ as key format, you can use
characters 0-9, a-f, and A-F. You must enter at least one encryption key here, and if you
entered multiple WEP keys, they should not be same with each other.
Enable 802.1x Authentication:
IEEE 802.1x is an authentication protocol. Every user must use a valid account to login to
this wireless router before accessing the wireless LAN. The authentication is processed by
a RADIUS server. This mode only authenticates user by IEEE 802.1x, but it does not
encryption the data during communication. If there is a RADIUS server in you environment,
please enable this function. Check this box and another sub-menu will appear:
RADIUS Server IP address:
Please input the IP address of radius server here
RADIUS Server Port:
Please input the port number of radius server here.
RADIUS Server Password:
Please input the port number of radius password here.
After you finish WEP setting, please click ‘Apply’ button and the following message will be
displayed on your web browser: