User's Manual

User’s Manual
47
Set the type of preamble, do not modify default value if you don’t know what it is,
default setting is ‘Short Preamble’.
Broadcast ESSID:
Decide if the wireless router will broadcast its own ESSID or not. You can hide the ESSID
of your wireless router (set the option to ‘Disable’), so only people those who know the
ESSID of your wireless router can get connected.
CTS Protect:
Enabling this setting will reduce the chance of radio signal collisions between 802.11b and
802.11g/n wireless access points. It’s recommended to set this option to ‘Auto’ or ‘Always’.
However, if you set to ‘None’, your wireless router should be able to work fine, too.
Tx Power :
You can set the output power of wireless radio. Unless you’re using this wireless router in a
really big space, you may not have to set output power to 100%. This will enhance
security (malicious / unknown users in distance will not be able to reach your
wireless router).
WMM:
The short of Wi-Fi MultiMedia, it will enhance the data transfer performance of multimedia
contents when they’re being transferred over wireless network. If you don’t know what it
is / not sure if you need it, it’s safe to set this option to ‘Enable’, however, default
value is ‘Disable’.
After you finish these wireless settings, please click ‘Apply’ button, button, and the following
message will be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on router setup, or click
‘Apply’ to reboot the router so the settings will take effect (Please wait for about 30 seconds
while router is rebooting).