User's Manual

User’s Manual
46
Fragment Threshold:
Set the Fragment threshold of wireless radio. Do not modify default value if you don’t
know what it is, default value is 2346.
RTS Threshold:
Set the RTS threshold of wireless radio. Do not modify default value if you don’t know
what it is, default value is 2347.
Beacon Interval:
Set the beacon interval of wireless radio. Do not modify default value if you don’t know
what it is, default value is 100.
DTIM Period:
Set the DTIM period of wireless radio. Do not modify default value if you don’t know
what it is, default value is 3.
Data Rate:
Set the wireless data transfer rate to a certain value. Since most of wireless devices will
negotiate with each other and pick a proper data transfer rate automatically, it’s not
necessary to change this value unless you know what will happen after modification.
N Data Rate:
Same as above, but only for 802.11n clients.
Channel Width:
Set channel width of wireless radio. Do not modify default value if you don’t know what
it is, default setting is ‘Auto 20/40 MHz’.
Preamble Type: