User's Manual

User’s Manual
44
Band:
Select the band you want to use, all the wireless routers must use the same setting.
ESSID:
Input the ESSID of your wireless router, the setting should be the same with other wireless
routers for the convenience of roaming.
Channel Number:
Select the channel you want to use, all the wireless routers must use the same setting.
Associated Clients:
Click ‘Show Active Clients’ button, then an “Active Wireless Client Table” will pop up. You
can see the status of all active wireless stations that are connecting to the access point.
MAC address 1 to 4:
Input the MAC address of other wireless routers.
Set Security:
Click to set security settings for this connection.
 Setup procedure for ‘Universal Repeater’
In this mode, the router can act as a wireless repeater; it can be Station and AP at the
same time. It can use Station function to connect to a Root AP and use AP function to
service all wireless stations within its coverage.
Band:
Select the band you want to use, all the wireless routers must use the same setting.
ESSID:
This is the name of wireless router. You can type any alphanumerical characters here,
maximum 32 characters. ESSID is used to identify your own wireless router from others
when there are other wireless routers in the same area. Default SSID is ‘default’, it’s