User's Manual

User’s Manual

ESSID:

This is the name of wireless router. You can type any alphanumerical characters here,

maximum 32 characters. ESSID is used to identify your own wireless router from others

when there are other wireless routers in the same area. Default SSID is ‘default’, it’s

recommended to change default ESSID value to the one which is meaningful to you, like

myhome, office_room1, etc.

Channel Number:

Please select a channel from the dropdown list of ‘Channel Number’, available channel

numbers are 1 to 13 for European countries, 1 to 11 for USA. You can choose any channel

number you want to use, and almost all wireless clients can locate the channel you’re using

automatically without any problem. However, it’s still useful to remember the channel

number you use, some wireless client supports manual channel number select, and this

would help in certain scenario when there is some radio communication problem.

Associated Clients:

Click ‘Show Active Clients’ button, then an “Active Wireless Client Table” will pop up. You

can see the status of all active wireless stations that are connecting to the access point.

 Setup procedure for ‘Station-Infrastructure’:

In this mode, you can connect the router to Ethernet device such us TV, Game player,

HDD&DVD to enable the Ethernet device be a wireless station and join to a wireless

network through an access point or AP router.

Band:

Select the band you want to use.

ESSID:

This is the name of wireless network. You can type the SSID of the network you would like

to connect here.

Site Survey:

When you use this wireless router as a wireless station for Ethernet network device to have

wireless capability, you have to associate it with a working access point. Click ‘Select Site