User's Manual

User’s Manual

Please click ‘Continue’ to back to previous setup menu; to continue on other setup

procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait

for about 30 seconds while router is rebooting).

 Basic Wireless Settings

Please click ‘Wireless’ menu on the left of web management interface, then click ‘Basic

Settings’, and the following message will be displayed on your web browser:

This wireless router can be work in 6 modes:

1. AP: Standard wireless AP (access point).

2. Station-Infrastructure: Configure the router to Ethernet device such us TV, Game

player, HDD&DVD to enable the Ethernet device be a wireless station.

3. AP Bridge-Point to Point: Connect this router with another wireless router, to expand

the scope of network.

4. AP Bridge-Point to Multi-Point: Connect this router with up to four other wireless

routers, to expand the scope of network.

5. AP Bridge-WDS: Connect this router with up to four WDS-capable wireless routers, to

expand the scope of network.

6. Universal Repeater: The router can act as Station and AP at the same time. It can use

Station function to connect to a Root AP and use AP function to service all wireless

stations within its coverage.