User's Manual

User’s Manual

If you don’t really understand the descriptions listed above, don’t worry! We will

provide recommended setup values below.

Please follow the following instructions to set wired LAN parameters:

Please click ‘LAN’ menu on the left of web management interface, there are three setup

groups here: ‘LAN IP’, ‘DHCP Server’, and ‘Static DHCP Leases Table’. Here are setup

instructions for each of them:

 LAN IP section:

IP address:

Please input the IP address of this router.

Subnet Mask:

Please input subnet mask for this network.

802.1d Spanning Tree:

If you wish to activate 802.1d spanning tree function, select ‘Enabled’ for setup item

‘802.1d Spanning Tree’, or set it to ‘Disabled’

DHCP Server:

If you want to activate DHCP server function of this router, select ‘Enabled’, or set it to

‘Disabled’.

 DHCP Server:

Lease Time:

Please choose a lease time (the duration that every computer can keep a specific IP

address) of every IP address assigned by this router from dropdown menu.