User's Manual

User’s Manual

Please input the password assigned by your Internet service provider here.

L2TP Gateway:

Please input the IP address of PPTP gateway assigned by your Internet service provider

here.

MTU:

Please input the MTU value of your network connection here. If you don’t know, you can use

default value.

Connection Type:

Please select the connection type of Internet connection you wish to use.

Continuous – The connection will be kept always on. If the connection is interrupted,

the router will re-connect automatically.

Connect On-Demand – Only connect when you want to surf the Internet. “Idle Time

Out” is set to stop the connection when the network traffic is not sending or receiving

after an idle time.

Manual – After you have selected this option, you will see the “Connect” button and

“Disconnect” button, click “’Connect” and the router will connect to the ISP. If you want

to stop the connection, please click “Disconnect” button.

Idle Time Out:

If you have selected the connection type to “Connect-On-Demand”, please input the idle time

out.

When you finish with all settings, please click ‘OK; if you want to go back to previous

menu, click ‘Back’.

 Setup procedure for ‘Telstra Big Pond’:

User Name:

Please input the user name assigned by Telstra.

Password:

Please input the password assigned by Telstra.