User's Manual

User’s Manual

4.2 General Setup

In this chapter, you’ll know how to change the time zone, password, and remote

management settings. Please start your web browser and log onto router web management

interface, then click ‘General Setup’ button on the left, or click ‘General Setup’ link at the

upper-right corner of web management interface.

 Time zone and time auto-synchronization:

Please follow the following instructions to set time zone and time auto-synchronization

parameters:

Please click ‘System’ menu on the left of web management interface, then click ‘Time Zone’,

and the following message will be displayed on your web browser: Please select time zone

at ‘Set time zone’ drop-down list, and input the IP address or host name of time server. If you

want to enable daylight savings setting, please check ‘Enable Function’ box, and set the

duration of daylight setting. When you finish, click ‘Apply’. You’ll see the following message

displayed on web browser: