User's Manual

User’s Manual
17
Connection ID:
Please input the connection ID here, this is optional and you can leave it blank.
MTU:
Please input the MTU value of your network connection here. If you don’t know, you can use
default value.
BEZEQ-ISRAEL:
Setting item ‘BEZEQ-ISRAEL’ is only required to check if you’re using the service provided
by BEZEQ network in Israel.
Connection type:
Please select the connection type of Internet connection you wish to use, please refer to last
section for detailed descriptions.
Idle Time Out:
Please input the idle time out of Internet connection you wish to use, and refer to last section
for detailed descriptions.
After you finish with all settings, please click ‘OK’ button; if you want to go back to
previous menu, click ‘Back’
 Setup procedure for ‘L2TP xDSL’:
L2TP is another popular connection method for xDSL and other Internet connection types,
and all required setting items are the same with PPTP connection.
Like PPTP, there are two kinds of required setting, we’ll start from ‘WAN Interface Settings’:
Please select the type of how you obtain IP address from your service provider here. You
can choose ‘Obtain an IP address automatically’ (equal to DHCP, please refer to ‘Cable
Modem’ section above), or ‘Use the following IP address’ (equal to static IP address, please
refer to ‘PPPoE xDSL’ section above).